ESPEC Brings Semiconductor Reliability Test Systems to PCB West 2026

SANTA CLARA, Calif. - EntSun -- ESPEC North America will exhibit at PCB West 2026 at the Santa Clara Convention Center, booth 518, bringing its semiconductor reliability test portfolio to the largest printed circuit board conference in Silicon Valley. The conference runs September 29 through October 2, with the exhibition floor open one day only on Wednesday, September 30.

As semiconductor manufacturing expands across North America, engineers need test methods that catch failure modes standard functional testing misses. Two are increasingly common on dense boards. Electrochemical migration surfaces in the field rather than on the bench, and solder joint fatigue under thermal cycling produces intermittent failures that are expensive to diagnose after shipment.

ESPEC will show two integrated pairings addressing both.

The AMI electrochemical migration evaluation system monitors for gradual resistance drift and sudden migration events, with detection under 100 microseconds. It supports up to 300 channels with independent module control and testing voltages from 100V standard to 2,500V, complying with IPC-TM-650 (2.6.3.3), AEC-Q200, and ISO/IEC 17025. AMI pairs with ESPEC HAST chambers, which combine high temperature, elevated humidity, and positive pressure to accelerate moisture-related failures. Running them together synchronizes electrical measurement with the environmental conditions producing it, in a single test.

More on EntSun News

• PrimeStyleAI Unveils Agentic Fashion Commerce Ecosystem With Intelligent Sizing and Virtual Try-On
• Different Worlds. Different Genres. One Creative Point of View
• A British Voice Announces 'Editorially Speaking,' Streaming This Fall on Tubi and Roku
• Fifty Years After Arriving at 17, Jacob "Jay" Adoni Looks Back on a New York Career
• Marc Yaffee Headlines Friday November 20 at Talking Stick Resort

The AMR conductor resistance evaluation system provides continuous monitoring of solder joint and conductor resistance through thermal cycling, with accuracy of plus or minus 0.5% at 100 mOhm and scaling from 40 to 280 channels. Every unit ships with ISO/IEC 17025-compliant calibration. AMR pairs with the TSE-12 thermal shock chamber, correlating resistance data with temperature transitions as they happen rather than reporting pass or fail at the end of a run.

Both systems are engineered by ESPEC to work with ESPEC chambers. That means synchronized data, simpler setup, and one point of contact for calibration and service.

More on EntSun News

• Tek84 Unveils New Brand Identity Built to Magnify What Security Officers Can Do
• The Return of Plaza México's 'Paseo de Las Estrellas' Honoring Recording Artist Majo Aguilar
• CoreVar Announces Cooking with AI, an Eight-Topic Live Webinar Series
• Queen of NOC Expands Coaching Services to Make Numerology-Based Guidance More Accessible
• Yvonne Sullivan Announces 72-Hour Flash Sale Featuring the Expanded NOC Divination System Guide

ESPEC North America is part of ESPEC Corp., the world's largest company dedicated exclusively to environmental test chambers, with ISO 9001:2015 manufacturing certification. The AMI and AMR line originates from ESPEC's Japanese engineering organization and is now expanding into North American labs.

The PCB West exhibition floor runs a single day and the Printed Circuit Engineering Association reports it often sells out. With more than 2,000 attendees, ESPEC recommends scheduling ahead. Engineers can reserve time with the team before September 30 or call 616-896-6100.

About ESPEC
ESPEC Corp. is the world's largest manufacturer of environmental test chambers. ESPEC North America offers a full range of environmental test chambers and related services across the continent.