EntSun News
 
EntSun News/10669795

Announcing SurfKoat's New Concrete Floor Sealer Garage Floor Paint

Are you protecting your little piece of paradise. A garage is used daily for many things, parking the car, grill-outs and many other activities. Using an epoxy floor concrete sealer paint will not only improve the look of your garage, but will protect your concrete for years to come.

NASHVILLE, Tenn. - Sept. 17, 2016 - EntSun -- Using epoxy concrete sealer as a garage floor paint will help prevent stains and deterioration, and it will give any garage floor a tough finish for that showroom look.

http://www.youtube.com/watch?v=yYF6ex_ueSc

Most garage slabs only receive a minimum of sealer when originally poured, so years of storage and spills really take their toll. Plus the natural porosity and chalkiness of concrete makes it almost impossible to keep really clean. If the garage floor or any other concrete slab was originally poured with no underlying vapor barrier, it's possible for water vapor pressure to actually lift coatings off the surface. Consult with SurfKoat's epoxy support for solutions including surface applied vapor barriers and how to use the new concrete floor sealer garage floor paint.
One of the highly chosen products is Deco Guard which is a non-yellowing, low sheen, siloxane modified methyl methacrylate with a low viscosity for better penetration on concrete substrates. Deco Guard's unique chemical reactive formulation provides superior resistance to de-icing road salts, salt water pool systems, rain, sleet and snow compared to standard sealers used to protect exterior concrete.

Some of the highlights of this all new formula are:

- Excellent moisture retention for proper curing
- Protects slabs from construction dirt and stains
- Economical and easy to apply with standard equipment


The concrete floor must be completely dry before beginning this project. If your floor shows any signs of water seepage, the source of the water must be eliminated before starting. Some of the materials used for this project require special masks and other equipment, due to fumes. Please read all product labels carefully. Allow the floor to dry thoroughly after each coating is applied. Thoroughly wash floor with a degreasing solution. Rinse several times until mop is clean. Allow to dry for several days.

Check out all of SurfKoat's Concrete Stains, Concrete Sealer products and Garage Floor Paints.

They ideally work with concrete contractors.

Media Contact
Surface Koatings, Inc.
(615) 323-9461
***@surfkoat.com


Source: Surface Koatings, Inc.

Show All News |

0 Comments
Submit
    Latest on EntSun News